10 Motorcycle Clear Film

Trending
-5%

10 Motorcycle Clear Film

£???

Offer Ends In:
17Days03Hours49Minutes02Seconds

This is a pack of 10 Motorcycle Clear Film sheets, match and laminate them with our ABS Plates to produce finished number plates.

Film Media Component

SKU: lg103f Category:
Log-In & Buy
  • Description
  • Additional information

Description

  • SKU/Part No: lg103f
  • Size: 229x178mm or 9×7 inch
  • Quantity: 10
  • Colour: Clear
  • Wet Faced: No
  • Match: Motorcycle Plates – White, Yellow and Yellow GB.

This is a pack of 10 Motorcycle Clear Film sheets, UV stable for colour fastness they are highly durable. Each one is coated with a substrate for better toner bonding so either side can be printed on using a modified LED printer.

Film Printing
Our Film Media System for film and plates

Film printing is our most popular and versatile number plate media system, it allows colour to be used removing the need for pre-printed media.

Match up and laminate a reverse printed film sheet with a reflective plate to produce an affordable and standards compliant number plate.

Making a Number Plate
Jig & Roller combing film and a plate

Make a number plate using our 3 step process.
1: Design 2: Print 3: Assemble
Design in our software, then print it out and simply assemble the matched components together.

Assembly with a Jig & Roller

We recommend using a jig and roller to combine number plate components for a professional finish.

  • Using the pins place a Plate adhesive face up on the jig, positioned flat and square.
  • Fold back a few centimetres of the adhesive cover on the end nearest the rollers.
  • Use the pins and line up the Film on top, its printed side facing towards the plate.
  • Carefully join the two components together by hand at the exposed edge.
  • Slide both parts towards the rollers, joined edge nearest.
  • Take and keep hold of the folded adhesive cover.
  • Slowly wind the arm so the components are fed through the roller.
  • The adhesive cover should be pulled away while the roller bonds the parts together.
Laminating Film & Plates
Place plate on the jig
Fold back adhesive cover
Line up film on top and join
Slide the parts towards rollers
Hold flap and roller handle
Feed the components through the rollers

Additional information

Weight0.25 kg
Dimensions229 × 178 × 10 mm
Media Type

Film