100 Adhesive Pads
This is a pack of 100 adhesive pads for fitting replacement number plates to vehicles, these are high tack and shouldn’t be relocated.
- Additional information
This pack of 100 adhesive pads are used to fit replacement number plates to most vehicles. These self adhesive sticky pads are made from a polyethylene foam carrier coated on both sides with a high tack adhesive, which is protected by a removable film cover. These pads come as either strips or in rolls. To cover your bases and ensure you have fixings for all circumstances, consider our universal fixing kit. It comes with everything you may need to fit a number plate.
Be careful when using these pads because of the extremely strong glue used on them, these pads not suitable for relocation once pressed into place. They’re designed to be fitted and then left in place.
First remove your old number plates and clean the area with a mild detergent or white spirit and let this dry or evaporate. Stick three pads to the rear of the new number plate spacing them equally, typically people use a pad one either end and one in the middle. Pull the backing tape off the adhesive pads and line up the plate near where you want it to be. When you’re happy push it firmly into place, hold it for a few seconds taking care to keep it level and still.
|Dimensions||100 × 15 × 2 mm|