White Oblong Reflective


White Oblong Reflective


This White Oblong Reflective is used to make Standard Number Plates, simply laminate a printed sheet to the back of an acrylic face.

Reflective Plate Component

SKU: nrd001w Category:


  • SKU/Part No: nrd001w
  • Size: 520x111mm
  • Quantity: 1
  • Colour: White
  • Wet Faced: No
  • Printable: Yes
  • Match: Oblong Acrylic Face.

This White Oblong Reflective sheet has a high specification reflective face that’s UV stable and resistant to fading. It’s also coated with a finish that provides increased print bonding from either thermal or LED printers.

Standard Number Plates
Our Reflective Media System

Standard number plates are made by printing onto reflective sheets, tried and trusted it produces high quality monotone plates.

Simply laminate a printed reflective sheet to a adhesive coated acrylic face to produce a number plate that satisfy legal regulations.

Combining Components
Jig combining reflective and acrylic

Make a number plate using our 3 step process.
1: Design 2: Print 3: Assemble
Design in our software, then print it out and simply assemble the matched components together.

Assembly with a Jig & Roller

We recommend using a jig and roller to combine number plate components for a professional finish.

  • Use the pins and place your Reflective on the jig, positioned flat and square.
  • Fold back a few centimetres of the adhesive cover on an Acrylic face.
  • Line up the Acrylic on top, Adhesive facing down towards the reflective.
  • Carefully join the components together at the Exposed adhesive, ensure the edges match.
  • Slide both parts towards the rollers, Joined edge nearest.
  • Take and keep Hold of the folded adhesive cover.
  • Slowly Wind the arm so the components are fed through the roller.
  • The adhesive cover should be Removed while the roller bonds the parts together.
  • Finally, remove the other protective Cover from the Acrylic.
Laminating Reflective & Acrylic
Place reflective on the jig
Fold back the acrylics adhesive cover
Line up acrylic and join together
Move to rollers then hold flap and arm
Feed media through the rollers
Finally remove protective cover from acrylic

Additional information

Weight0.05 kg
Dimensions520 × 111 × 1 mm
Media Type


You've just added this product to the cart: