Yellow Oblong Euro GB Reflective

Trending
-20%

Yellow Oblong Euro GB Reflective

£1.30 £1.04

The Yellow Oblong GB Reflective is used to make standard 2-part number plates, it features a pre-printed side badge with the EURO Flag and GB text.

Reflective Plate Component

SKU: nrd001ygb Category:

Description

  • SKU/Part No: nrd001ygb
  • Size: Oblong 520x111mm
  • Style: Euro Flag with GB Text
  • Quantity: 1
  • Colour: Yellow
  • Wet Faced: No
  • Printable: Yes
  • Match: Oblong Acrylic Face.

This badged Yellow Oblong GB Reflective is high specification plate media, which is UV stable and resistant to fading. It also features the EURO Flag with GB text pre-printed onto the left hand side of each sheet. And it’s surface is coated with a finish that improves print bonding for thermal and LED printers. But remember, set up your LG Plates template to accommodate the printed badge.

Standard Number Plates
Our Reflective Media System

Standard plates are made by printing onto reflective sheets, tried and trusted this method produces quality monotone plates.

To produce a legal number plate that satisfy regulations, simply laminate this reflective to a Tennants clear acrylic face.

Combining Components
Jig combining reflective and acrylic

Make a number plate using our 3 step process.
1: Design 2: Print 3: Assemble
Design in our software, then print it out and simply assemble the matched components together.

Assembly with a Jig & Roller

We recommend using a jig and roller to combine your printed Yellow Oblong Euro GB Reflective with a clear acrylic face for a professional finish.

  • Use the pins and place your Printed Reflective on the jig, positioned flat and square.
  • Fold back a few centimetres of the adhesive cover on an Acrylic face.
  • Line up the Acrylic on top, Adhesive facing down towards the reflective.
  • Carefully join the components together at the Exposed adhesive, ensure the edges match.
  • Slide both parts towards the rollers, Joined edge nearest.
  • Take and keep Hold of the folded adhesive cover.
  • Slowly Wind the arm so the components are fed through the roller.
  • The adhesive cover should be Removed while the roller bonds the parts together.
  • Finally, remove the other protective Cover from the Acrylic.
Laminating Reflective & Acrylic
Place reflective on the jig
Fold back the acrylics adhesive cover
Line up acrylic and join together
Move to rollers then hold flap and arm
Feed media through the rollers
Finally remove protective cover from acrylic

Additional information

Weight0.05 kg
Dimensions520 × 111 × 1 mm
Media Type

Reflective

You've just added this product to the cart: