20 Yellow 3-Part 533x152mm Plates

20 Yellow 3-Part 533x152mm Plates

£???

This bundle of matched components produces 20 Yellow 3-Part 533x152mm Plates compliant with BSAU145d.
Includes: 20 x lg140f + 20 x naw040 + 20 x nrw040y

SKU: 20lgh040y Category:
Log-In & Buy

Description

This bundle of 20 Yellow 3-Part 533x152mm Plates has been created to encourage compliant number plate production. Our British Standard certification is for finished number plates made with this specific plate media. So we can guarantee number plates made from them will be road legal, subject to correct use.

  • SKU/Part No: 20lgh040y
  • Plate Size: Oversized-4 533x152mm  (21×6 inch)
  • Plate Colour: Yellow
  • Bundle Includes: 20 533x152mm Clear Film Sheets (lg140f), 20 Yellow 533x152mm Wet Reflective Sheets (nrw040y) and 20 533x152mm Acrylic Faces (naw040)

As can be seen from the contents, you have to print and join our components together to make number plates. Therefore ensure your system prints onto clear film before buying this 20 Yellow 3-Part 533x152mm Plates bundle. Just like our trade number plate printing solution for motor factors and the aftermarket.

Bundle Components

20 x 533x152mm Clear Film Sheets – lg140f

lg140f: 10 533x152mm Clear Film
Tennants Clear Film is designed for printed number plate production. For 3-part number plates, you simply print on and sandwich it between an acrylic face and wet reflective. Each film sheet is coated with a substrate for better OKI toner bonding.
.

20 x 533x152mm Acrylic Faces – naw040

naw040: 533x152mm Acrylic Face
Our Acrylic Faces from Toennjes, are certified to make Tennants number plates. But only when laminated onto our printed film & reflective sheets. Every clear acrylic face is UV stable to resist discolouring and comes with a wet adhesive face for easy assembly.

20 x Yellow 533x152mm Wet Reflective Sheets – nrw040y

nrw040y: Yellow 533x152mm Wet Reflective
Oralite Number Plate Reflective is built for number plate production. For 3-part number plates, you simply laminate it to the back of a printed film sheet. Each retro reflective sheet is fade resistant comes with a wet adhesive face for easy assembly.

Hybrid 3-Part Number Plates

Tennants hybrid number plates were created to produce affordable colour number plates. By printing onto clear film, eye catching logos and badges are possible. As a result, you can deliver a highly colourful, reflective and durable number plate.

A selection of Hybrid Number Plates

BSAU145d Number Plates

Making number plates is easy with our 3 step process.
1: Design 2: Print 3: Assemble

First, you design a number plate in our compliant software. Second you print it onto our plate media. And finally, assemble the specific matched components together.

But only when you use each part of our combined solutions, can we guarantee your number plates will be 100% legal.

Premium Jig & Roller

Assemble with a Jig & Roller

When laminating your plate media together, we recommend using a jig and roller or a professional finish.

  • Place your printed Clear Film face up on the jig bed.
  • Now, fold back a few centimetres of the adhesive cover on an Acrylic Face.
  • Carefully position the Acrylic above the Film, Adhesive Side Down and join them together
  • Leading with the joined edge, keep hold of the Fold and slowly wind the arm & Feed them through the roller.
  • This will remove the adhesive cover and bond these two parts together.
  • Next, put a Wet Reflective adhesive face up on the jig, folding back part of its cover.
  • Position the parts joined earlier on top with the Film Facing Down, join them together at the exposed edge
  • Once again Feed them through the rollers, keeping hold of the folded adhesive cover.
  • This will remove the final adhesive cover and Bond all the parts together.
  • Finally, remove the other Protective Cover from the Acrylic.

Laminating Printed Film to Clear Acrylic & Wet Reflective Guide

1: Place your printed clear film on the jig

2: Fold back a few centimetres of the adhesive cover on an Acrylic Face and join it to the film.

3: Hold the cover flap and feed components through the rollers, removing the adhesive cover.

4: Place the wet reflective on the jig and fold back a few centimetres of the adhesive cover.

5: Join the printed film and acrylic face on top of the wet reflective sheet.

6: Hold the cover flap and feed components through the rollers, removing the adhesive cover.

Additional information

Dimensions533 × 152 mm
Media Type

3-Part

You may also like…

You've just added this product to the cart: