10 White ZEV UK Flag Reflective


This pack of 10 White ZEV UK Flag Reflective sheets come with a pre-printed green side badge with the Union Flag and UK Text.
Badge: ZEV Flag for UK Roads.
Reflective Printing - Icon

SKU: nrd001wpukz Category:
View basket


  • SKU/Part No: nrd001wpukz
  • Size: 520x111mm
  • Style: Union Flag with UK Text
  • Quantity: 10 Sheets
  • Colour: White
  • Printable: Yes
  • Reflective Plates: Oblong Clear Acrylic.

Each one of these 10 White ZEV UK Flag Reflective sheets is UV stable and resistant to fading. It also features a green flash showing the Union Flag with UK Text pre-printed onto the left hand side. Of course, any number plate made from them can only displayed on Zero Emission Vehicles. And is road legal for use on UK roads, but overseas a UK oval sticker must also be displayed. But remember, you need to set up your software to accommodate the pre-printed badge.

Reflective Number Plates

Reflective and Acrylic Plates

Standards compliant number plates are made by printing onto a reflective sheet, then laminating it underneath an acrylic face.

For more information on standards and regulations, check out our main site and the number plates pages or knowledge base.

Combining Components

Jig combining reflective and acrylic

Make a number plate using our 3 step process.
1: Design 2: Print 3: Assemble
Build it in our software, then print it out and simply assemble the matched components together.

Assemble with a Jig & Roller

Whenever you make a printed number plate, we recommend using a jig and roller for a professional finish.

Reflective Plates
  • Use the pins and place your Reflective on the jig, positioned flat and square.
  • Fold back a few centimetres of the adhesive cover on an Acrylic face.
  • Line up the Acrylic on top, Adhesive facing down towards the reflective.
  • Carefully join the components together at the Exposed adhesive, ensure the edges match.
  • Slide both parts towards the rollers, Joined edge nearest.
  • Take and keep Hold of the folded adhesive cover.
  • Slowly Wind the arm so the components are fed through the roller.
  • The adhesive cover should be Removed while the roller bonds the parts together.
  • Finally, remove the other protective Cover from the Acrylic.

Additional information

Dimensions520 × 111 mm
Media Type

Dry Reflective, Green Badge