457x111mm Film Bundles

£86.00

Our 465x111mm Film Bundles include enough Clear Film & ABS Plates to make 20 BSAU145e Number Plates.

Bundle: Pick a Bundle Colour.

SKU: N/A Category:
Clear
View basket

Description

Our 457x111mm Film Bundles includes 20 Clear Film Sheets & ABS Plates in either white or yellow. This set of matched components is covered by our British Standard certification. So we guarantee your number plates made from it will be road legal, subject to correct use. This size is perfect for your 6 Digit Short Number Plates.

  • Size: 457x111mm / 18×4⅖in
  • Contents: 20 Clear Film Sheets and ABS Plates.
  • Colour Options: White & Yellow ABS
  • For: Short 6 Digit Plates – Format Permitting
  • Discount: 10% Off Trade Rate*

As you know, you have to print and join our components together to make a number plate. Therefore ensure your system prints onto clear film before buying this matched bundle.

Note* Reduction applies to standard trade accounts only. Customers with discount rates get their pre-agreed discount.

Bundle Components

20 x 457x111mm Clear Film Sheets

457x111mm Clear Film
Tennants Clear Film is designed for printed number plate production. For Film Number Plates, you simply print on and then laminate it on top of an ABS Plate. Each film sheet is coated with a substrate for better toner bonding.

20 x 457x111mm ABS Plates – White / Yellow

457x111mm ABS Plates - Yellow
Our Rigid ABS Plates are certified to make compliant number plates. But only when laminated to our Clear Film sheets. Every plate has a UV stable reflective face which resists discolouring. And comes with a wet adhesive costing for easy assembly.

Film Number Plates

Film and ABS Plates

You make film number plates by printing onto a clear film sheet and then laminate it above a rigid ABS plate.

For more information on standards and regulations, check out our main site and the number plates pages or knowledge base.

Combining Components

Roller jigs are used for plate assembly

Make a number plate using our 3 step process.
1: Design 2: Print 3: Assemble
Build it in our software, then print it out and simply assemble the matched components together.

Assemble with a Jig & Roller

Whenever you make a printed number plate, we recommend using a jig and roller for a professional finish.

Film Plates
  • Start by applying any Badge Panels to your printed Clear Film, for colour correction.
  • Use the pins and place your rigid ABS Plate, face up on to the jig.
  • Fold back a few centimetres of the adhesive cover at the end of the plate.
  • Next, line up your Clear Film sheet on top, with the printed side facing downwards.
  • Carefully join the components together at the Exposed Adhesive edge.
  • Ensure both the edge and sides are correctly lined up before joining together.
  • Now slide the two parts towards the Rollers at the end of the jig.
  • Slowly Wind the arm so the components are fed through, keeping hold of the folded adhesive cover.
  • This will remove the adhesive cover and Bond the two parts together.

Additional information

Dimensions 457 × 111 mm
Media Type

Film Plates, Matched Bundles

Short

457x111mm