OKI B432 Black Toner
£125.00
This genuine OKI B432 Black Toner cartridge has a 7k yield and is compatible with our Trade Mono B432 printer.
OKI Model: 44574302
- Description
- Additional information
Description
- SKU/Part No: oki44574302
- Yield: 7000 A4 Pages
- Brand: OKI
- Genuine: Yes
- For: OKI B432 Printers
This OKI B432 Black Toner cartridge is compatible with our B432 number plate printer. And it’s made to be simple to install and give you reliable print results. Moreover it contains enough toner for 7,000 A4 pages at normal coverage rates. Since it’s a mono printer the B432 has no other colours and utilises a Toner on Drum Unit.
As a genuine consumable, this toner is guaranteed to work perfectly with our B432 number plate printer. In fact just like our plate media, it’s manufactured to meet exacting specifications and standards. And this reliability is a vital part of our BSAU145e certification. Which is why using compatible consumables may effect your number plates legality.
So if you’re printing road legal number plates – only use Genuine Consumables.
Replacing your OKI B432 Black Toner
To replace the OKI B432 Black Toner is easy, just follow the simple steps below. Or for more help, try our Knowledge Base article on how to Replace B432 Toner Cartridges. The instructions that follow assume you are directly facing the front of your OKI printer.
Your printer will let you know when it is time to replace the Toner Cartridge. First you’ll see warning messages on the display screen found on the control panel, warning a particular toner is getting low. This is when you need to order a replacement if you don’t have any. The message will change and prompt you to replace it once the cartridge is empty, it may even stop printing.
Step 1: Remove Used Toner Cartridge
To install a new B432 Black Toner, means removing the used one. So open up your printer to reveal the Toner & Drum unit. Remove the unit by taking hold of the handle on top and lifting it up out of the machine. Next you need to take the used toner off the drum.
To remove the toner, turn the blue lever on the side of the cartridge and turn it towards you. This unlocks the cartridge, now simply lift it out the machine and place it aside for disposal.
Step 2: Prepare & Load the New Toner Cartridge
Get your new B432 Black Toner ready for your printer.
Unpack the replacement cartridge and unbag it. First, shake it several times to loosen its contents, then remove its orange tape. Now put the Black Toner onto your Image Drum, simply insert its left-hand side into the notch. Then lower down the right hand side and lock the blue lever.
Step 3: Insert the Toner & Unit Cartridge
Insert the new Toner & Drum Unit.
Position the unit with the blue lever on the right and align the pins with the first slot on the printer. Now push the unit gently down & away from you until it’s in place. Finally, close up so your printer can detect the new toner.
Additional information
| Dimensions | 280 × 60 × 60 mm |
|---|---|
| Consumables | Toner |
| Product Brand | OKI |
