Oblong Yellow National SCO Flag Reflective
£1.76
Our Oblong Yellow National SCO Flag Reflective is sold in packs of 10 sheets with a pre-printed blue badge.
- Description
- Additional information
Description
Our Oblong Yellow National SCO Flag Reflective sheets are UV stable, resistant to fading and come with a pre-printed blue badge. When making a number plate don’t forget to set up your software to accommodate the pre-printed badge.
- Partcode: nrd001ypsco
- Size: Oblong 520x111mm
- Style: Blue National Flags – St. Andrew Flag with SCO Text
- Position: Full Height on Left Side
- Pack Size: 10 Sheets
- Colour: Yellow
- Printable: Yes
- Reflective Plates: Laminate to Oblong Clear Acrylic.
This item comes in packs of 10 reflective sheets, pre-printed with a side badge. All our dry reflective is UV stable and resistant to fading. And our National Flag designs are road legal when used on UK roads. Which means a UK Oval Sticker must also be displayed if driving overseas.
Reflective Number Plates
Make a reflective number plate by laminating your Printed Dry Reflective underneath an Acrylic Face.
For more information on standards and regulations, check out our main site and the number plates pages or knowledge base.
Combining Matched Components
Make a number plate using our 3 step process.
1: Design 2: Print 3: Assemble
Build it in our software, then print it out and simply assemble the matched components together.
Assembly with a Jig & Roller
Whenever you make a printed number plate, we recommend using a jig and roller for a professional finish.
Reflective Plates
- Use the pins and place your Reflective on the jig, positioned flat and square.
- Fold back a few centimetres of the adhesive cover on an Acrylic face.
- Line up the Acrylic on top, Adhesive facing down towards the reflective.
- Carefully join the components together at the Exposed adhesive, ensure the edges match.
- Slide both parts towards the rollers, Joined edge nearest.
- Take and keep Hold of the folded adhesive cover.
- Slowly Wind the arm so the components are fed through the roller.
- The adhesive cover should be Removed while the roller bonds the parts together.
- Finally, remove the other protective Cover from the Acrylic.
Additional information
| Dimensions | 520 × 111 × 0.2 mm |
|---|---|
| Media Type | Dry Reflective, Blue Badge |
| Product Brand | Tennants UK |
