OKI C532 Yellow Image Drum
OKI C532 Yellow Image Drum
This is an original and genuine OKI C532 Yellow Image Drum with a yield of 30,000 A4 pages at normal print coverage rates.
OKI Model: 46484105
- Additional information
- SKU/Part No: oki46484105
- Yield: 30,000 A4 Pages
- Brand: OKI
- Genuine: Yes
- For: OKI C532 Printers
This OKI C532 Yellow Image Drum is compatible with our c532 number plate printer. And it’s made to be simple to install and give you reliable print results. Moreover, when new it contains enough toner for 30,000 A4 pages at normal coverage rates. For the other image drums browse our shops OKI C532 pages.
As a genuine consumable, this drum is guaranteed to work perfectly with our C532 number plate printer. In fact just like our plate media, it’s contents are manufactured to meet exacting specifications. And this reliability is a vital part of our BSAU145e certification. Which is why using compatible consumables may effect your number plates legality.
So if you’re printing road legal number plates – only use Genuine Consumables.
Replace a OKI C532 Image Drum
Installing a replacement image drum is easy, just follow the simple steps below. Or for more help, try our knowledge base article on how to Replace C532 Drums. The instructions that follow assume you are directly facing the front of your OKI printer.
The large yield of a printers image drum is constantly topped up by its toner cartridge. But eventually it will begin to run low and notify you on the control panel. This is when you need to order a replacement if you don’t have any. The message will change and prompt you to replace it once it is empty, it may even stop printing.
Step 1: Remove the Empty Image Drum
To install a new drum, you have to remove the empty one first.
Open up your printers top cover to reveal its innards. Locate the empty drum by using the label on the toner that sit above the drum. To remove it, simply pull the drum unit straight up out of the printer. Now take the toner cartridge off the empty drum and put it aside for later.
Step 2: Prepare Your New Image Drum & Toner
Get your new drum ready to install into your printer.
Take the replacement drum from its box and remove all its packaging. Now insert the used toner cartridge on top by aligning the side indentation with the protrusion on the drum. Then push the other side gently down into place and lock it using the blue lever.
Step 3: Install the New Image Drum
Insert the new image drum & toner cartridge into your printer.
Simply line up your replacement drum and gently push it down into the empty slot on the printer. Ensure it’s pushed all the way down and well seated. Finally, close up so your printer can detect the new drum unit.
|385 × 160 × 218 mm