10 330x90mm Clear Film
Our 330x90mm Clear Film makes Film Signs or Plates & comes in packs of 10 sheets.
- Additional information
- Size: 13×3½ inch / 330x90mm
- Quantity: 10 Film Sheets
- Colour: Clear
- Printable: Yes
- Film Signs: Laminate above 330x90mm ABS Plates.
Our 330x90mm Clear Film sheets are UV stable for colour fastness and durability. And each one of the 10 sheets is fully treated to offer better bonding for your prints. So you don’t have to worry about which side to print onto.
A Clear Film Sheet can make both Film Signs & Showroom Plates. But ensure you reverse print, so your design is protected between the Film & ABS Plate. After all, this combination forms part of our number plate specification.
Making Simple Signs
Make signs & showroom plates using our easy 3 step process.
1: Design 2: Print 3: Assemble
Build it in our software, then print it out and simply assemble the matched components together.
Assemble with a Jig & Roller
Whenever you make a printed sign or number plate, we recommend a jig and roller for a professional finish.
- Start by placing your rigid ABS Plate, face up on to the jig.
- Now Fold Back some the adhesive cover on one end of the plate.
- Next, line up your Clear Film with the printed side facing downwards.
- Then carefully join the components together at the Exposed End.
- Slide both parts towards the rollers, with the Joined Edge nearest.
- Take and keep Hold of the adhesive cover you folded over earlier.
- And slowly Wind the Arm so your components are fed through the roller.
- This will Strip Off the adhesive cover, while the roller bonds it together.
- Finally, Wipe Down your finished sign to remove any dust or marks.
|Dimensions||330 × 90 × 0.3 mm|
Clear Film, Film Plates