10 406x111mm Dry Reflective
This 406x111mm Dry Reflective is used to make Short Number Plates & comes in packs of 10 sheets.
Colour: Select White or Yellow below.
- Additional information
- Size: 406x111mm
- Quantity: 10 Reflective Sheets
- Colours: White & Yellow
- Wet Faced: No Adhesive
- Printable: Yes
- For: Short 3-5 Digit Plates – Format Permitting
- Reflective Plates: Laminate to 406x111mm Clear Acrylic.
Each one of our 406x111mm Dry Reflective sheets is UV stable and resistant to fading. No matter which colour you use, it provides superior bonding when printed. And it adds the much needed reflectivity to a complete number plate. This size is perfect for your 6 digit Short Number Plates.
Reflective Number Plates
You make standards compliant number plates by printing onto a reflective sheet, then laminating it underneath an acrylic face.
For more information on standards and regulations, check out our main site and the number plates pages or knowledge base.
Make a number plate using our 3 step process.
1: Design 2: Print 3: Assemble
Build it in our software, then print it out and simply assemble the matched components together.
Assemble with a Jig & Roller
Whenever you make a printed number plate, we recommend using a jig and roller for a professional finish.
- Use the pins and place your Reflective sheet on the jig, positioned flat and square.
- Fold back a few centimetres of the adhesive cover on an Acrylic face.
- Line up the Acrylic on top, Adhesive facing down towards the reflective.
- Carefully join the components together at the Exposed adhesive, ensure the edges match.
- Slide both parts towards the rollers, Joined edge nearest.
- Take and keep Hold of the folded adhesive cover.
- Slowly Wind the arm so the components are fed through the roller.
- The adhesive cover should be Removed while the roller bonds the parts together.
- Finally, remove the other protective Cover from the Acrylic.
|Dimensions||406 × 111 × 0.4 mm|
Dry Reflective, Reflective Plates