10 21x6in GB National Flag Reflective


Our 21×6 National Flag Reflective come in packs of 10 sheets with a Blue Union Flag & GB Text.

SKU: nrd040yb Category:


Our 21×6 National Flag Reflective sheets are UV stable and resistant to fading. Only available in yellow, it comes with a blue side badge showing the Union Flag and GB Text. But don’t forget to set up your plates software to accommodate the pre-printed badge.

  • Size: 21x6in / 533x152mm – Oversized
  • Style: Blue GB National Flag
  • Position: Full Height on Left Side
  • Pack: 10 Dry Reflective Sheets
  • Colour: Yellow Only
  • Reflective Plates: Laminate to 533x152mm Clear Acrylic.

This item comes in packs of 10 reflective sheets, pre-printed with a side badge. All our dry reflective is UV stable and resistant to fading. And our National Flag designs are road legal when used on UK roads. Which means a UK Oval Sticker must be displayed if driving overseas.

Reflective Number Plates

Reflective and Acrylic Plates

Standards compliant number plates are made by printing onto a reflective sheet, then laminating it underneath an acrylic face.

For more information on standards and regulations, check out our main site and the number plates pages or knowledge base.

Combining Components

Jig combining reflective and acrylic

Make a number plate using our 3 step process.
1: Design 2: Print 3: Assemble
Build it in our software, then print it out and simply assemble the matched components together.

Assemble with a Jig & Roller

Whenever you make a printed number plate, we recommend using a jig and roller for a professional finish.

Reflective Plates
  • Use the pins and place your Reflective on the jig, positioned flat and square.
  • Fold back a few centimetres of the adhesive cover on an Acrylic face.
  • Line up the Acrylic on top, Adhesive facing down towards the reflective.
  • Carefully join the components together at the Exposed adhesive, ensure the edges match.
  • Slide both parts towards the rollers, Joined edge nearest.
  • Take and keep Hold of the folded adhesive cover.
  • Slowly Wind the arm so the components are fed through the roller.
  • The adhesive cover should be Removed while the roller bonds the parts together.
  • Finally, remove the other protective Cover from the Acrylic.

Additional information

Dimensions 533 × 152 × 0.4 mm
Media Type

Dry Reflective, Blue Badge