50 9x7in Overseas Film

9x7in Overseas Film Sheets

50 9x7in Overseas Film

£34.50

In stock

£34.50

Our 9x7in Overseas Film comes in packs of 50 sheets with a choice of Foreign Travel Badges.

Options: Pick a Overseas Flag.

SKU: N/A Category:
Clear

Description

Our 9x7in Overseas Film sheets are UV stable for colour fastness and highly durable. In addition, you can pick between 2 printed badge designs. Options include the standard Foreign Travel Badge and a ZEV version for electric vehicles. But don’t forget to set up your plates software to accommodate the pre-printed badge.

  • Size: 9×7 inch / 229x178mm – Motorcycle
  • Style: Foreign Travel  Badge – Union Flag with UK Text
  • Position: Half Height at Bottom Left
  • Pack: 50 Clear Film Sheets
  • Printable: Yes
  • Film Plates: Laminate to 9x7in LG EnviroPlate.
  • 3-Part: Match with 9x7in Clear Acrylic & Wet Reflective.

9x7in Overseas Film comes in a packs of 50 film sheets, pre-printed with a foreign travel badge. Because it’s pre-printed, you will not need to use a white badge panel. And our Foreign Travel designs are road legal on UK & EU roads. So vehicles can drive overseas without the need for an Oval UK Sticker. Tennants matched components are covered by our BSAU145e certification, as shown on our website.

BSAU 145e Compliant

A Standard White Number Plate

A Clear Film sheet makes both Film and 3-Part Number Plates. And is certified to British Standards, but only when you match it to specific components. Such as a 3mm LG EnviroPlate or when making 3-Part plates, between an acrylic face & wet reflective.

For more information on standards, regulations and our testing regime, check out our main site and the number plates pages or knowledge base.

Making Number Plates

Roller jigs are used for plate assembly

Make a number plate using our 3 step process.
1: Design 2: Print 3: Assemble
Build it in our software, then print it out and simply assemble the matched components together.

Assemble with a Jig & Roller

Whenever you make a printed number plate, we recommend using a jig and roller for a professional finish.

Film Plates
  • Start by applying any Badge Panels to your printed Clear Film, for colour correction.
  • Then use the pins and place your rigid LG EnviroPlate, face up on to the jig.
  • Fold back a few centimetres of the adhesive cover at the end of the plate.
  • Next, line up your Clear Film sheet on top, with the printed side facing downwards.
  • Carefully join the components together at the Exposed Adhesive edge.
  • Ensure both the edge and sides are correctly lined up before joining together.
  • Now slide the two parts towards the Rollers at the end of the jig.
  • Slowly Wind the arm so the components are fed through, keeping hold of the folded adhesive cover.
  • This will remove the adhesive cover and Bond the two parts together.
3-Part Plates
  • Place your Clear Film sheet, printed face up on the roller jig.
  • Fold back a few centimetres of the adhesive cover at the end of an Acrylic Face.
  • Position the Acrylic above the Film, Adhesive Side Down and carefully join the two pieces together
  • Leading with the joined edge, keep hold of the Fold and slowly wind the arm & Feed the parts through the roller.
  • This will remove the adhesive cover and bond the two parts together.
  • Next, put a Wet Reflective adhesive face up on the jig, folding back part of its cover.
  • Position the parts joined earlier on top with the Film Facing Down, join them together at the exposed edge
  • Once again Feed them through the rollers, keeping hold of the folded adhesive cover.
  • Finally, remove the final protective cover from the Acrylic Face.

Additional information

Dimensions229 × 178 × 0.3 mm
Media Type

Clear Film, Overseas Badge

Product Brand

Tennants UK