10 565x184mm LG EnviroPlate
£59.00
Our 565x184mm LG EnviroPlate are used to make Film Number Plates & come in packs of 10 reflective plates.
Colour: Select White or Yellow plates below.
- Description
- Additional information
Description
- Size: 565x184mm or 22×7¼ inch
- Quantity: 10 LG EnviroPlate
- Colour Options: White & Yellow
- Wet Faced: Yes – Adhesive Coated
- Printable: No
- Film Plates: Laminate to 565x184mm Clear Film.
Our 565x184mm LG EnviroPlate are UV stable and resistant to fading. No matter which colour you use, it adds reflectivity to the back of your number plates. Wet-faced, their adhesive coating is protected by a quick release cover. And this is another size you can use for oversized plates. Tennants film number plates are covered by our BSAU145e certification, as shown on our website.
Film Number Plates
Make a film number plate by laminating your reverse printed Clear Film above a reflective LG EnviroPlate.
For more information on standards and regulations, check out our main site and the number plates pages or knowledge base.
Combining Matched Components
Make a number plate using our 3 step process.
1: Design 2: Print 3: Assemble
Build it in our software, then print it out and simply assemble the matched components together.
Assemble with a Jig & Roller
Whenever you make a printed number plate, we recommend using a jig and roller for a professional finish.
Film Plates
- Start by applying any Badge Panels to your printed film, for colour correction.
- Next use the pins and place a LG EnviroPlate, reflective face up on to the jig.
- Fold back a few centimetres of the adhesive cover at the end of the plate.
- Now, line up your Clear Film sheet on top, with the printed side facing downwards.
- Carefully join the components together at the Exposed Adhesive edge.
- Ensure both the edge and sides are correctly lined up before joining together.
- Finally slide the two parts towards the Rollers at the end of the jig.
- Slowly Wind the arm so the components are fed through, keeping hold of the folded adhesive cover.
- This will remove the adhesive cover and Bond the two parts together.
Additional information
Dimensions | 565 × 184 × 3 mm |
---|---|
Media Type | LG EnviroPlate, Film Plates |
Oversized | 565x184mm |
Product Brand | Tennants UK |